Intelligent Network Operations · Starting with Telecom

Network down
at 3am?

TelemindAI investigates network faults automatically — correlating logs, tracing paths, and pinpointing root causes in seconds, not hours.

See it investigate live →View API

telemindai — investigation in progress

$ investigate --incident "traffic to 192.168.74.13 blackout"

→ TelemindAI starting investigation...

⚡ get_routing_table(Beta-Node-01)

Route 192.168.74.12/30 → via 192.168.65.149 (Beta-Axis-02)

⚡ get_routing_table(Beta-Axis-02)

⚠ Route 192.168.74.12/30 NOT in active routing table

⚡ get_interface_status(Beta-Axis-02)

✗ GigabitEthernet1/0/6 *down (admin shutdown)

⚡ get_device_config(Beta-Axis-02)

ip route-static 192.168.74.12/30 next-hop 192.168.65.142 ← on GE1/0/6 subnet

🔴 ROOT CAUSE IDENTIFIED

GigabitEthernet1/0/6 on Beta-Axis-02 is administratively shutdown.

Static route for 192.168.74.12/30 inactive — traffic black-holed.

FIX → [Beta-Axis-02] interface GE1/0/6 → undo shutdown

How TelemindAI works

Three steps from alert to root cause

🔌

STEP 01

Connect your tools

Integrates with your network systems — routing tables, interface status, logs, alarms — via lightweight connectors. No device agents needed.

🧠

STEP 02

AI investigates

Multi-step agent traces paths, correlates logs, and queries devices in sequence — exactly like your best engineer, but in seconds.

✅

STEP 03

Root cause, not noise

Exact device, interface, fault type, and fix command. Not a wall of logs — one precise, actionable answer your team can execute immediately.

Built for teams already using AI

If your team uses Claude, GPT, or an internal AI — TelemindAI plugs in as a callable ops tool. Your AI gets a specialized network brain without rebuilding anything.

✓Callable via REST API — any AI system can invoke it

✓Multi-vendor: Cisco, Huawei, H3C, Nokia, Ericsson

✓Full reasoning trace — see exactly how diagnosis was reached

✓Standalone chat for teams without existing AI

✓Starting with Telecom, expanding to cloud, fintech, enterprise IT

Live investigation trace

→ Received: traffic interruption alert

⚡ Querying routing table — Beta-Node-01

Route found → via Beta-Axis-02

⚡ Checking interfaces — Beta-Axis-02

✗ GE1/0/6 administratively down

⚡ Reading device config — Beta-Axis-02

Static route depends on GE1/0/6 — INACTIVE

✅ Root cause identified in 4.2s

Software for Agents

TelemindAI is designed to be called by AI systems, not just humans. Any LLM can invoke it as a specialized ops intelligence tool.

POSThttps://api.telemindai.com/v1/investigate

REQUEST

{
  "network": "financial-zone-b",
  "incident": {
    "source": "Beta-Node-01",
    "destination": "192.168.74.13",
    "symptom": "traffic_blackout"
  },
  "tools": [
    "routing", "interfaces",
    "config", "alarms", "lldp"
  ]
}

RESPONSE

{
  "root_cause": {
    "device": "Beta-Axis-02",
    "interface": "GE1/0/6",
    "fault": "admin_shutdown",
    "confidence": "high"
  },
  "impact": "Static route inactive,
   traffic black-holed",
  "fix": "undo shutdown",
  "resolved_in_ms": 4200
}

Ready to stop firefighting?

Watch TelemindAI investigate a real network fault live in your browser. Routing failures, topology recovery, path tracing — no signup needed.

Launch live demo →

Early access — founders@telemindai.com

Network downat 3am?